Description
- Elastic tips: dimensionally stable even when twisted
- Distortion-tolerant, elastic precision tips
- Half-round, long, tapered jaws
- With cutting edges for soft, medium-hard and hard wire
- Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC
- 40° angled jaws
- Vanadium electric steel, forged, multi stage oil-hardened
For professional users from the electrical, motor and commercial vehicle sectors
Pliers for gripping, aligning and installation work and for cutting
The Knipex 26 21 200 needle nose pliers are primarily used for gripping, aligning and installation work. Because these types of work often involve cutting wire or conductors, a cutting function has been integrated. The sharp blades of the Knipex 26 21 200 which have also been hardened to 61 HRC are shaped to produce a bite type cut.
Strong when gripping and cutting – inherently stable also where there is twisting
The elastic precision tips of the needle nose pliers von Knipex remain stable when twisted. This allows the manual force deployed to be well measured – forcefully where necessary. The position of the cutting edges near the joint is very advantageous for the transmission of force. Cutting capacities of Ø 3.2 mm (medium-hard wire) and Ø 2.2 mm when cutting hard wire can be achieved.
Poorly accessible areas can be reached easily
The very long tips of the Knipex 26 21 200 make it possible to grip components that are hard to reach accurately and powerfully. The benefits of these snipe nose side cutting pliers can be seen immediately when difficult to reach components in technical assemblies, on engines and machinery are positioned, held, installed and modified. A tool that is suitable equally for delicate work and for powerful holding and cutting.
Technical attributes
| Part No. | 26 21 200 |
|---|---|
| EAN | 4003773022848 |
| Pliers | black atramentized |
| Head | polished |
| Handles | with plastic coating |
| Weight | 171 g |
| Dimensions | 200 x 47 x 13 mm |
| Standard | DIN ISO 5745 |
| REACH compliant | does not contain SVHC |
| RoHS compliant | not applicable |
| Cutting capacities medium hard wire (diameter) | Ø 3.2 mm |
| Cutting capacities hard wire (diameter) | Ø 2.2 mm |
| Jaw thickness (joint) (T1) | 9.5 mm |
| Tips width (W4) | 3.0 mm |
| Tips thickness (T2) | 2.5 mm |
| Gripping surface length (L4) | 23.0 mm |
| Jaw length (L3) | 73.0 mm |
| Head width (W3) | 18 mm |
Free Delivery On All Orders Over $100
$9.80 Delivery On Orders Under $100
Once your order is dispatched you will be sent a tracking link to keep track of your order. Delivery time frame is usually 1 - 3 business days. For some rural addresses delivery can take an extra day.
If you find that the product your have purchased is not right for the job, you are eligible for a full refund on your order within 30 days post delivery.
All products sold by Tool Factory come with a New Zealand warranty with at least a 12 month warranty period unless otherwise specified.
